Ergonomic Design for Ease of Use
|
Android/iOS SDK
|
1.77" Display
|
Bluetooth 5.0
|
5200mAh Removable Battery
|
|
Self-Developed UHF Module Based on Impinj E Series chips
|
Impinj Gen2X for Enhanced UHF Performance
|
900+ Tags/s Read Rate
|
30m+ / 100ft.+ Read Range
|
| Performance Parameter | |
| Optical system | |
| Light Source | |
| Image Sensor | |
| Image (Pixels) | |
| Field of View | |
| Decoding Rate | |
| Decoding Capabilities | |
| Roll / Pitch / Yaw | |
| Scanning speed | |
| Print Contrast | |
| Angle | |
| Resolution | |
| Depth of Field | |
| Printing Contrast | |
| Prompting Mode | |
| Interface | |
| Trigger Mode | |
| Setting Mode | |
| Frequency | |
| Communication Distance | |
| Transmission Rate | |
| Current | |
| Capability of Battery | |
| Specification(USB IRIS Scanner) | |
| Working Current | |
| Start Current | |
| Standby Current | |
| Working Current | |
| Resolution Ratio | |
| FoV | |
| Identification Range | |
| Registration Range | |
| Registration Time | |
| Identification Time | |
| Infared Wavelength | |
| FAR | |
| FRR | |
| Frame Rate | |
| Operating Temp. | |
| Storage Temp. | |
| Power Supply & Data Interface | |
| Operating System Requirements | |
| SDK Fitting System | |
| Printing | |
| Printing Method | |
| Resolution | |
| Max. Printing Speed | |
| Max. Printing Width | |
| Max. Printing Length | |
| Media | |
| RFID Tag | |
| Types | |
| Width | |
| Thickness | |
| Height | |
| Label Roll Diameter | |
| Core Diameter | |
| Label Length | |
| Label Roll Capacity | |
| Ribbon | |
| Types | |
| Width | |
| Length | |
| Core Diameter | |
| Capacity | |
| Symbology Decode Capability | |
| 1-D | |
| 2-D | |
| Decoding rate | |
| Interfaces | |
| Development Board | |
| Module | |
| Physical Characteristics | |
| Dimensions | 282 x 117.5 x 32mm / 11.10 x 4.63 x 1.26in. |
| Weight | 334 g / 11.78oz. (with battery) |
| Display | 1.77 inch, 128 x 160 |
| Battery | |
| Touch Panel | |
| Power | Battery specification: 5200 mAh Standby: over 70 hours (keeping bluetooth connected) Continuous use: up to 6 hours (UHF reading) Charging time: 3-4 hours (with standard adaptor and USB cable) |
| Material | |
| Speaker | |
| Vibrator | |
| Notification | |
| Microphone | |
| Buzzer | Support |
| Expansion Slot | |
| Interfaces | USB Type-C |
| Card slot | |
| Cable | |
| Audio | |
| Input Mode | |
| Keypad | |
| Sensors | |
| Button | |
| Pupil Lamp | |
| Indicator LED | Power, Work, Bluetooth |
| Size of adapted phone | |
| Product Material | Plastic |
| Colour | White |
| Voltage and Current | |
| Input Voltage | |
| Standby Current | |
| AC Adapter | |
| Sleep Current | |
| Comm Interface | |
| GPIO | |
| Baud Rate | |
| Cooling Mode | |
| Work Current | |
| Display Interface | |
| Port | |
| Charging Current | |
| Charging Duration | |
| Ethernet interface | |
| Power Supply | |
| Identification Lamp | |
| Ethernet Interface | |
| RFID Features | |
| RF Chip | |
| Impinj Gen2X | |
| Air Interface Protocol | |
| Working Frequency | |
| Output Power | |
| Output Power Flatness | |
| Antenna Interface | |
| Regions Supported | |
| Receive Sensitivity | |
| Tag RSSI | |
| Antenna Detector | |
| Ambient Temp Monitor | |
| Working Mode | |
| Communication Interface | |
| Connector | |
| Host Communication | |
| Power Supply | |
| Input Voltage | |
| Power Consumption in RF Output Mode | |
| Power Consumption in Standby Mode(EN high TTL level) | |
| Power Consumption in Power Down Mode(EN low TTL level) | |
| Communication | |
| Ethernet interface | |
| WLAN | |
| WWAN | |
| WWAN (Europe, Asia) | |
| WWAN (Europe) | |
| WWAN (America) | |
| WWAN (Quad-core) | |
| WWAN (Octa-core) | |
| WWAN (China) | |
| WWAN (Others) | |
| Bluetooth | Bluetooth Low Energy (BLE) 5.0 |
| WWAN(Overseas) | |
| Vo-LTE | |
| GPS | |
| GNSS | |
| GPS (Optional) | |
| USB Type C | |
| Note | |
| Power | |
| Input Voltage | |
| UHF | |
| HF | |
| Standby | |
| Developing Environment | |
| Operating System | |
| SDK | Android / iOS |
| Language | Java / Objective-C |
| Tool | Android Studio / Xcode |
| Security | |
| Performance | |
| CPU(1) | |
| CPU | |
| RAM+ROM(1) | |
| Option 1 | |
| Option 2 | |
| CPU(2) | |
| RAM+ROM | |
| High-level Configuration | |
| MCU | Cortex-M3 72MHz |
| Low-level Configuration | |
| RAM+ROM(2) | |
| RAM+ROM | |
| Storage | 50000 tags |
| RAM | |
| Flash | |
| Expansion | |
| User Environment | |
| Input Voltage | |
| Operating Temp. | -20℃~+50℃ |
| Storage Temp. | -40℃~+70℃ |
| Humidity | 5%RH - 95%RH non condensing |
| Luminance of environment | |
| Drop Specification | Multiple 1.5m / 4.9ft. drops (at least 20 times) to the concrete across the operating temperature range |
| Tumble Specification | 1000 x 0.5m / 1.64ft. falls at room temperature |
| Ambient Light Immunity | |
| Sealing | |
| ESD | ±15KV air discharge, ±8KV conductive discharge |
| Note | |
| Communication(Quad-core) | |
| WLAN | |
| WWAN | |
| WWAN (China) | |
| WWAN (Europe) | |
| WWAN (America) | |
| WWAN (Others) | |
| Bluetooth | |
| GNSS | |
| Note | |
| Communication Android 8.1 | |
| WLAN | |
| WWAN (China) | |
| WWAN (Europe) | |
| WWAN(America) | |
| WWAN (Others) | |
| Bluetooth | |
| GNSS | |
| Communication Android 11.0 | |
| WLAN | |
| WWAN | |
| Bluetooth | |
| GNSS | |
| Communication(Octa-core) | |
| WLAN | |
| WWAN (China) | |
| WWAN | |
| WWAN(Europe) | |
| WWAN(Overseas) | |
| WWAN (America) | |
| WWAN (Others) | |
| Bluetooth | |
| GNSS | |
| Barcode Scanning | |
| 2D Scanner | |
| Scan engine(Quad-core) | |
| Scan engine(Octa-core) | |
| 1D Linear Scanner | |
| Scan engine | |
| 1D Linear Scanner(Quad-core) | |
| 2D Imager Scanner(Quad-core) | |
| 2D Imager Scanner(Octa-core) | |
| 2D Imager Scanner | SE2707 |
| 1D Symbologies | UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc. |
| 2D Symbologies | PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX), etc. |
| Min.Resolution | |
| Note | *This function is optional |
| Note2 | |
| UHF RFID | |
| Engine | Based on Impinj E Series chips |
| Frequency | 920-925MHz / 902-928MHz / 865-868MHz |
| Impinj Gen2X | Supported |
| Protocol | EPC C1 GEN2 / ISO18000-6C |
| Antenna | Linear Polarized antenna |
| Power | |
| Fastest Read Rate (circular polarization) | |
| Output Power | |
| Output Power Precision | |
| Output Power Flatness | |
| Receive Sensitivity | |
| RSSI | |
| Ambient Temp Monitor | |
| Fastest Read Rate | 900+ tags/sec |
| Antenna Detector | |
| Antenna Port | |
| Communication Mode | |
| Multi-tag Inventory | |
| Max Read Range | 26m (Impinj MR6 tag, size 70 x 15mm) 27m (Impinj M750 tag, size 70 x 15mm) 31m (Alien H3 Anti-Metal tag, size 130 x 42mm) |
| Read Range | |
| Note | * Ranges are measured in the open outdoors and low interference environment, and rate is measured in a laboratory low interference environment, they are affected by tags and environment. |
| Note2 | |
| UHF1 | |
| Engine | |
| Frequency | |
| Impinj Gen2X | |
| Protocol | |
| Antenna | |
| Power | |
| Max Read Range | |
| Fastest Read Rate | |
| Communication Mode | |
| Note | |
| UHF2 | |
| Engine | |
| Frequency | |
| Impinj Gen2X | |
| Protocol | |
| Antenna | |
| Power | |
| Max Read Range | |
| Fastest Read Rate | |
| Communication Mode | |
| Note | |
| UHF3 | |
| Engine | |
| Frequency | |
| Protocol | |
| Antenna | |
| Impinj Gen2X | |
| Power | |
| Max Read Range | |
| Note | |
| InfraRed | |
| Wavelength | |
| Frequency | |
| Range | |
| Protocol | |
| Note | |
| Volume Measurement | |
| Sensor | |
| Range | |
| Measurement Error | |
| Module | |
| Field of View Angle | |
| Measurement Speed | |
| Measured Distance | |
| Note | |
| Fingerprint Recognition | |
| Sensor | |
| Fingerprint | |
| Sensing Area (mm) | |
| Resolution (dpi) | |
| Certifications | |
| Format Extraction | |
| Fake Finger Detection | |
| Security | |
| Note | |
| Fingerprint 1 | |
| Sensor | |
| Sensing Area (mm) | |
| Resolution (dpi) | |
| Certifications | |
| Format Extraction | |
| Fake Finger Detection | |
| Security | |
| Note | |
| Fingerprint 2 | |
| Sensor | |
| Sensing Area (mm) | |
| Resolution (dpi) | |
| Certifications | |
| Format Extraction | |
| Fake Finger Detection | |
| Security | |
| Note | |
| Fingerprint 3 | |
| Sensor | |
| Sensing Area (mm) | |
| Resolution (dpi) | |
| Certifications | |
| Format Extraction | |
| Fake Finger Detection | |
| Security | |
| Note | |
| Antenna 1 | |
| Frequency | |
| Polarization Mode | |
| Gain | |
| Horizontal Angle | |
| Vertical Angle | |
| VSWR | |
| FBR | |
| Characteristic Impedance | |
| Maximum Input Power | |
| Lightning Protection | |
| Antenna Port | |
| LF RFID | |
| Frequency | |
| Protocol | |
| Chips | |
| Range | |
| Note | |
| Antenna 2 | |
| Polarization Mode | |
| Frequency | |
| Gain | |
| Horizontal Angle | |
| Vertical Angle | |
| VSWR | |
| FBR | |
| Characteristic Impedance | |
| Maximum Input Power | |
| Lightning Protection | |
| Antenna Port | |
| Camera | |
| Camera | |
| Front Camera | |
| Top Camera | |
| External Camera (optional) | |
| Rear Camera | |
| Internal Camera (Optional) | |
| Note | |
| Note2 | |
| Thermal Printer | |
| Rate | |
| Image Size (pixel) | |
| Paper Width | |
| Paper Diameter | |
| Paper Length | |
| NFC | |
| Frequency | |
| Protocol | |
| Chips | |
| Range | |
| Remark | |
| Note | |
| Note2 | |
| LF RFID (with external antenna) | |
| Frequency | |
| Protocol | |
| Chips | |
| Range | |
| Note | |
| PSAM | |
| Protocol | |
| Slots | |
| Note | |
| HF RFID | |
| HF | |
| Frequency | |
| Protocol | |
| Chips | |
| Range | |
| Note | |
| Note2 | |
| Iris Recognition | |
| Rate | |
| Range | |
| FAR | |
| Note | |
| Note2 | |
| Temperature Collection | |
| Measure Position | |
| Measure Method | |
| Measure Distance | |
| Measure Range | |
| Measure Accuracy | |
| Measure Duration | |
| Spectral Range | |
| Resolution | |
| Note | |
| HID iCLASS SE | |
| Frequency | |
| Chips | |
| Protocol | |
| OBD | |
| Protocol | |
| Reading Performance | |
| Reading Rate | |
| Reading Range | |
| Optional Accessories | |
| Accessories | |
| Note | |
| Certifications | |
| Certifications | |
| Other Specification (RFID Printer) | |
| Emulation | |
| Software | |
| Resident Fonts | |
| Download Fonts | |
| Barcodes | |
| Code Page | |
| Graphics | |
| Options & Accessory | |
| Agency Approval | |
| Other Specification (Printer) | |
| Processor | |
| Driver | |
| Print Head Life | |
| Internal Fonts | |
| Barcodes | |
| Rotation | |
| Emulation | |
| Factory Options | |
| Dealer Options | |
| Agency Approval | |
| Specification (RFIDLinked) | |
| Data Collection Suite | |
| Printing/Encoding Suite | |
| Data Management | |
| Note | |
| Electrical | |
| Frequency Range | |
| Polarization Type | |
| Gain | |
| 3dB Beam-Width. H-Plan | |
| 3dB Beam-Width. E-Plan | |
| VSWR | |
| Front to back Ratio | |
| Input Impedance | |
| Max Input Power | |
| Lightning Protection | |
| Mechanical | |
| Connector Type | |
| Dimensions H*W*D (mm) | |
| Weight | |
| Radome Material | |
| Radome color | |
| Radiant board material | |
| Operating Temperature | |
| Sealing | |
| Installation mode | |
| Support Pole Diameter | |
| Rated Wind Velocity | |
| Documents & Manuals | ||
| 2025-08-05 | ||
| 2024-04-03 | ||
| 2023-04-28 | ||
| Videos | ||
| 2024-09-06 | ||
| 2022-05-17 | ||