Operated with Hand Wrap, Wristband or Lanyard | SDK: Support Android/iOS |
1200mAh Removable Battery | Light Weight and Small Size |
Short Range UHF Scanning (Impinj E310 Chip) | Bluetooth Low Energy (BLE) 5.0 |
Performance Parameter | |
Optical system | |
Light Source | |
Image Sensor | |
Image (Pixels) | |
Field of View | |
Decoding Rate | |
Decoding Capabilities | |
Roll / Pitch / Yaw | |
Scanning speed | |
Print Contrast | |
Angle | |
Resolution | |
Depth of Field | |
Printing Contrast | |
Prompting Mode | |
Interface | |
Trigger Mode | |
Setting Mode | |
Frequency | |
Communication Distance | |
Transmission Rate | |
Current | |
Capability of Battery |
Specification(USB IRIS Scanner) | |
Working Current | |
Start Current | |
Standby Current | |
Working Current | |
Resolution Ratio | |
FoV | |
Identification Range | |
Registration Range | |
Registration Time | |
Identification Time | |
Infared Wavelength | |
FAR | |
FRR | |
Frame Rate | |
Operating Temp. | |
Storage Temp. | |
Power Supply & Data Interface | |
Operating System Requirements | |
SDK Fitting System |
Printing | |
Printing Method | |
Resolution | |
Max. Printing Speed | |
Max. Printing Width | |
Max. Printing Length |
Media | |
RFID Tag | |
Types | |
Width | |
Thickness | |
Label Roll Diameter | |
Core Diameter | |
Label Length | |
Label Roll Capacity |
Ribbon | |
Types | |
Width | |
Length | |
Core Diameter | |
Capacity |
Symbology Decode Capability | |
1-D | |
2-D | |
Decoding rate | |
Interfaces |
Development Board | |
Module |
Physical Characteristics | |
Dimensions | 50 x 62 x 19mm / 1.97 x 2.44 x 0.75 in. |
Weight | 64 g / 2.26 oz. ( with glove: 90 g / 3.17 oz. ) |
Display | |
Battery | |
Touch Panel | |
Power | 1200 mAh ( removable ) |
Material | |
Speaker | |
Vibrator | |
Notification | |
Microphone | |
Buzzer | |
Expansion Slot | |
Interfaces | |
Card slot | |
Cable | |
Audio | |
Input Mode | |
Keypad | ON/OFF, SCAN |
Sensors | |
Button | |
Pupil Lamp | |
Indicator LED | Red indicator will be ON when charging; Blue indicator will be ON when device has been fully charged; Green indicator will be ON when battery is higher than 20%; Green indicator will flash when battery is lower than 20%; Bluetooth is not paired when bluetooth indicator is OFF; Bluetooth is paired when bluetooth indicator is ON |
Size of adapted phone | |
Product Material | |
Colour | Yellow, Blue, Gray |
Voltage and Current | |
Input Voltage | |
Standby Current | |
AC Adapter | |
Sleep Current | |
Comm Interface | |
GPIO | |
Baud Rate | |
Cooling Mode | |
Work Current | |
Display Interface | |
Port | USB Type-C |
Charging Current | 5 V / 1.5 A |
Charging Duration | 1 hours |
Ethernet interface | |
Power Supply | |
Identification Lamp | |
Ethernet Interface |
RFID Features | |
RF Chip | |
Air Interface Protocol | |
Working Frequency | |
Output Power | |
Output Power Flatness | |
Antenna Interface | |
Regions Supported | |
Receive Sensitivity | |
Tag RSSI | |
Antenna Detector | |
Ambient Temp Monitor | |
Working Mode |
Communication Interface | |
Connector | |
Host Communication |
Power Supply | |
Input Voltage | |
Power Consumption in RF Output Mode | |
Power Consumption in Standby Mode(EN high TTL level) | |
Power Consumption in Power Down Mode(EN low TTL level) |
Communication | |
Ethernet interface | |
WLAN | |
WWAN | |
WWAN (Europe, Asia) | |
WWAN (Europe) | |
WWAN (America) | |
WWAN (Quad-core) | |
WWAN (Octa-core) | |
WWAN (China) | |
WWAN (Others) | |
Bluetooth | Bluetooth Low Energy (BLE) 5.0 |
WWAN(Overseas) | |
Vo-LTE | |
GPS | |
GNSS | |
GPS (Optional) | |
USB Type C | USB connection to realize data transfer |
Note |
Power | |
Input Voltage | |
UHF | |
HF | |
Standby |
Developing Environment | |
Operating System | |
SDK | Android / iOS SDK Supported |
Language | |
Tool | |
Security | RFID Encrypted Module ( reserve ) |
Performance | |
CPU(1) | |
CPU | |
RAM+ROM(1) | |
Option 1 | |
Option 2 | |
CPU(2) | |
RAM+ROM | |
High-level Configuration | |
MCU | Cortex-M3 72MHz |
Low-level Configuration | |
RAM+ROM(2) | |
RAM+ROM | |
Storage | |
RAM | |
Flash | |
Expansion |
User Environment | |
Input Voltage | |
Operating Temp. | -20 °C to +50 °C |
Storage Temp. | -40 °C to +70 °C |
Humidity | 5% RH - 95% RH non condensing |
Luminance of environment | |
Drop Specification | 1.2 m dropping on concrete |
Tumble Specification | |
Ambient Light Immunity | |
Sealing | IP65 |
ESD | |
Note |
Communication(Quad-core) | |
WLAN | |
WWAN | |
WWAN (China) | |
WWAN (Europe) | |
WWAN (America) | |
WWAN (Others) | |
Bluetooth | |
GNSS | |
Note |
Communication Android 8.1 | |
WLAN | |
WWAN (China) | |
WWAN (Europe) | |
WWAN(America) | |
WWAN (Others) | |
Bluetooth | |
GNSS |
Communication Android 11.0 | |
WLAN | |
WWAN | |
Bluetooth | |
GNSS |
Communication(Octa-core) | |
WLAN | |
WWAN (China) | |
WWAN | |
WWAN(Europe) | |
WWAN(Overseas) | |
WWAN (America) | |
WWAN (Others) | |
Bluetooth | |
GNSS |
Barcode Scanning | |
2D Scanner | |
Scan engine(Quad-core) | |
Scan engine(Octa-core) | |
1D Linear Scanner | |
Scan engine | |
1D Linear Scanner(Quad-core) | |
2D Imager Scanner(Quad-core) | |
2D Imager Scanner(Octa-core) | |
2D Imager Scanner | |
1D Symbologies | |
2D Symbologies | |
Min.Resolution | |
Note | |
Note2 |
UHF RFID | |
Engine | CM-3N module based on Impinj E310 |
Frequency | 920-925 MHz / 902-928 MHz / 865-868 MHz |
Protocol | EPC C1 GEN2 / ISO18000-6C |
Antenna | Linear Polarized Antenna (-2.2dBi) |
Power | 0.5W (27dBm, support +19-27dBm adjustable) |
Fastest Read Rate (circular polarization) | |
Output Power | |
Output Power Precision | |
Output Power Flatness | |
Receive Sensitivity | |
RSSI | |
Ambient Temp Monitor | |
Fastest Read Rate | |
Antenna Detector | |
Antenna Port | |
Communication Mode | |
Read Range | |
Max Read Range | 80 cm |
Note | *Range depends on tags and environment |
Note2 |
UHF1 | |
Engine | |
Frequency | |
Protocol | |
Antenna | |
Power | |
Max Read Range | |
Fastest Read Rate | |
Communication Mode | |
Note |
UHF2 | |
Engine | |
Frequency | |
Protocol | |
Antenna | |
Power | |
Max Read Range | |
Fastest Read Rate | |
Communication Mode | |
Note |
UHF3 | |
Engine | |
Frequency | |
Protocol | |
Antenna | |
Power | |
Max Read Range | |
Note |
InfraRed | |
Wavelength | |
Frequency | |
Range | |
Protocol | |
Note |
Volume Measurement | |
Sensor | |
Range | |
Measurement Error | |
Module | |
Field of View Angle | |
Measurement Speed | |
Measured Distance | |
Note |
Fingerprint Recognition | |
Sensor | |
Fingerprint | |
Sensing Area (mm) | |
Resolution (dpi) | |
Certifications | |
Format Extraction | |
Fake Finger Detection | |
Security | |
Note |
Fingerprint 1 | |
Sensor | |
Sensing Area (mm) | |
Resolution (dpi) | |
Certifications | |
Format Extraction | |
Fake Finger Detection | |
Security | |
Note |
Fingerprint 2 | |
Sensor | |
Sensing Area (mm) | |
Resolution (dpi) | |
Certifications | |
Format Extraction | |
Fake Finger Detection | |
Security | |
Note |
Fingerprint 3 | |
Sensor | |
Sensing Area (mm) | |
Resolution (dpi) | |
Certifications | |
Format Extraction | |
Fake Finger Detection | |
Security | |
Note |
Antenna 1 | |
Frequency | |
Polarization Mode | |
Gain | |
Horizontal Angle | |
Vertical Angle | |
VSWR | |
FBR | |
Characteristic Impedance | |
Maximum Input Power | |
Lightning Protection | |
Antenna Port |
LF RFID | |
Frequency | |
Protocol | |
Chips | |
Range | |
Note |
Antenna 2 | |
Polarization Mode | |
Frequency | |
Gain | |
Horizontal Angle | |
Vertical Angle | |
VSWR | |
FBR | |
Characteristic Impedance | |
Maximum Input Power | |
Lightning Protection | |
Antenna Port |
Camera | |
Camera | |
Front Camera | |
Top Camera | |
External Camera (optional) | |
Rear Camera | |
Internal Camera (Optional) | |
Note | |
Note2 |
Thermal Printer | |
Rate | |
Image Size (pixel) | |
Paper Width | |
Paper Diameter | |
Paper Length |
NFC | |
Frequency | |
Protocol | |
Chips | |
Range | |
Remark | |
Note | |
Note2 |
LF RFID (with external antenna) | |
Frequency | |
Protocol | |
Chips | |
Range | |
Note |
PSAM | |
Protocol | |
Slots | |
Note |
HF RFID | |
HF | |
Frequency | |
Protocol | |
Chips | |
Range | |
Note | |
Note2 |
Iris Recognition | |
Rate | |
Range | |
FAR | |
Note | |
Note2 |
Temperature Collection | |
Measure Position | |
Measure Method | |
Measure Distance | |
Measure Range | |
Measure Accuracy | |
Measure Duration | |
Spectral Range | |
Resolution | |
Note |
HID iCLASS SE | |
Frequency | |
Chips | |
Protocol |
OBD | |
Protocol |
Reading Performance | |
Reading Rate | |
Reading Range |
Optional Accessories | |
Accessories | Hand wrap, wristband, lanyard, charing cradle for battery |
Note |
Certifications | |
Certifications |
Other Specification (RFID Printer) | |
Emulation | |
Software | |
Resident Fonts | |
Download Fonts | |
Barcodes | |
Code Page | |
Graphics | |
Options & Accessory | |
Agency Approval |
Other Specification (Printer) | |
Processor | |
Driver | |
Print Head Life | |
Internal Fonts | |
Barcodes | |
Rotation | |
Emulation | |
Factory Options | |
Dealer Options | |
Agency Approval |
Specification (RFIDLinked) | |
Data Collection Suite | |
Printing/Encoding Suite | |
Data Management | |
Note |
Documents & Manuals | ||
2023-08-31 | ||
2023-04-28 | ||
2024-05-08 |
Videos | ||
MR20 Wearable RFID Reader Introduction 2023-11-08 |
||
2024-09-06 | ||
2022-05-17 |